Alternative to Bent Tip
These Holders are used between a welding machine and a tip to protect tips, shanks, and adapters.
Examples of welding with the Mini Power Holder
Holder with 100 mm offset for welding a deep workpiece
Special Offset Tip for welding an extremely narrow workpiece
Base Tip for welding a U-shaped workpiece
Examples of replaceable tips
Special Tips are made to order.
Examples of Combinations
E Type(offset: 9mm)
Taper to Match Holder φ16 T=1/10
Taper to Match Holder φ16 T=MT#2
Suitable for Base Tips
Suitable for 30°Cut Tips